So if your room is 10 feet by 12 feet, 10 x 12 = **120 square feet**.

Also, How do I calculate kitchen tile area?

**Multiply the width and height to find the total area in inches, then divide by 144** to find the amount of square feet needed (amount of inches in a square foot). For example, if your space is 48″ (width) x 18″ (height) = 864. 864/144 = 6 square feet. Be sure to measure every area that needs tile and add them together!

Hereof, How much does it cost to tile 50 square feet?

The national average range is **between $1,000 and $5,000**, with most people paying around $3,500 for 200 sq. ft. of 12-inch porcelain tile installed. The low cost for this project is $500 for a 50 sq.

Also to know How many tiles is 10 square inches? **288 tiles** of dimension 10 square inch are required.

How many tiles is 1 square meter?

This is a common question and ultimately this depends on the size of the tile. A 150 x 150mm will give you approximately **44 tiles** to a square metre, but a 600 x 600mm tile will give you 2.8 tiles per square metre.

**18 Related Questions Answers Found**

Table of Contents

**What are tile sizes?**

As a rule, floor tile is typically 1/2-inch to 3/4-inch thick. Wall tile tends to be thinner and available in squares (3 inches to 6 inches). Mosaic tiles are usually the smallest tile, available in 2-inch squares. The most popular and readily available tile sizes are (in inches) **12 x 12, 16 x 16, 12 x 24 and 18 x 18**.

**How many packs of tiles will I need?**

How many boxes of tile will I need? **Divide the total square footage you need by the amount included in the box of tile**. If you need 165 square feet, and each box holds 10, then divide 10 into 165: You’ll need 16.5 boxes.

**How much can a tiler do in a day?**

Ultimately, rates per square metre can vary between £20 and £40 per square metre. However, tilers can also charge by the day rate if they’ll be there for more than six hours or so, which can come to **between £150 and £200 per day**.

**What is the going rate for tile installation?**

Professional installation adds $5 to $10 per square foot, depending on the amount of prep work required, putting the total average cost to install a tile floor at **$7 to $14 per square foot**. Expect to pay $1,050 to $2,100 to install a tile floor in a 10×15-foot room (150 square feet).

**How do you price a tile job?**

To price the tile, calculate the area of the job by **multiplying the length of the room by the width for the total square feet**. Multiple the total square feet by the tile price per square foot, and then add 20 percent for cuts and breakage.

**How much does a tiler charge per hour?**

On average, though, tilers charge anywhere from **$45 to $150 per hour**. You are more likely to be quoted a per square metre rate, ranging from $35 per square metre to $120 per square metre.

**What is the most popular tile size?**

**Square tiles** are easily the most common choice, and the majority of tile manufacturers use the following size grades: 2”, 3”, 4”, 6”, 8”, 12”, 16”, 18” and 24”.

**What is the actual size of a 12×12 tile?**

If the 12×12 tile is measured nominally, meaning the tile is **11-7/8″x11-7/8″ in** size, but the accent tile has an actual measurement of 6″x6″, the two tiles will not fit together properly.

**Which tile size is best for flooring?**

Bathroom Tile Size Advice: Floors, Walls, Showers, and Tubs

Area | Recommended Sizes |
---|---|

Small shower floor |
1-inch square |

Small shower walls | 1-inch square to 4-inch square |

Moderate or large shower walls | 4-inch to 15-inch by 30-inch |

Bathroom floor | 1-inch square to 12-inch square, or up to large-format |

•

Nov 26, 2020

**How many 12×18 tiles come in a box?**

Size: 12×18 inch (30×45 cm /300×450 mm) Tiles Per Box: **6 pcs**.

**How long does a tiler take?**

However, most people consider **four hours** of tiling to be standard for a 40-square-foot space. On top of this, you’ll need around an hour of prep time per job, an hour of layout time per job, and around an hour for grouting and cleaning per square-foot.

**Why is tile installation so expensive?**

Porcelain Tile is more expensive, **because its often better quality then ceramic tile**, and also comes in a greater variety of colors, sizes and styles. The average price for Porcelain Tile is $1.30-3 per square foot. However, prices for high-end porcelain tile can go as high as $4-8+ per square foot.

**How much does it cost to tile a shower per square foot?**

According to estimates from The Home Depot, the average cost to tile a shower is $1,500 based on this breakdown: **Tile cost: $2 per square foot**. **Setting materials: $1.37 per square foot**. **Installation: $8 per square foot**.

**Do diagonal tiles make a room look bigger?**

One trick is to install your tile diagonally or sometimes called “on point”. This helps break up the room a little and also will make your tiles **look bigger in** addition to your room feel larger. … Regardless of the size of tile you choose to you, installing it diagonally will give your room a larger appearance.

**How much does labor cost to tile a shower?**

Installing shower floor tiles is more expensive than installing wall tiles because some tiles require extra mortar on the back, while others may need to be beaten down to avoid their edges kicking up. Overall labor cost is **between $8 and $10 per square foot**.

**How much tile can you lay in a day?**

How Many Floor Tiles Can Be Laid In A Day? While it’s near impossible to answer this question, on average, **150 12 x 12 floor tiles** can be laid in a day. However, this number can vary wildly on either side as there are various factors that influence how long it takes to tile a floor.

**What is the average labor cost to tile a shower?**

Installing shower floor tiles is more expensive than installing wall tiles because some tiles require extra mortar on the back, while others may need to be beaten down to avoid their edges kicking up. Overall labor cost is **between $8 and $10 per square foot**.

**How much does it cost to tile a 12×12 room?**

Tile Installation Cost The average cost to install tile flooring is $10 to $15 per square foot with most homeowners spending **between $825 and $2,520** for porcelain or ceramic tiling.

**What’s the average price to tile a bathroom?**

Ultimately, tiling your bathroom will cost anywhere **between $1,500 and $3,000** depending on its size and your taste in materials.